The frame is able to access the network but is unable to access the DNS server. In most cases, these settings should be left blank so that the frame can retrieve the proper information on each connection attempt from your access point/router using DHCP. Go to the wireless settings screen and verify that the IP Address, Subnet Mask, and Default Gateway are set properly. The frame is unable to access the default gateway on your network. The frame tries to connect but returns the error "Configuration Problem".You should also go to the wireless settings screen and verify the Network Authentication, Data Encryption, and Network Key are set properly. Verify your access point/router is configured and working properly. The frame is unable to connect to your access point/router. Unplug the wireless adapter and plug it back in, verify the connection is snug. The frame is unable to detect the CEIVA Wireless adapter. The frame tries to connect but returns the error "Wireless Not Available".Go to the wireless settings screen and verify the Network Authentication, Data Encryption, and Network Key are set properly. The frame is able to access your access point/router but is unable to authenticate. The frame tries to connect but returns the error "Wireless Connect Failure".To view the Error screen, scroll through your slideshow by pressing the "Next" button on the button tray until you reach that slide. If you experience one of the following errors with your wireless connection, check Line 16 of your CEIVA frameâs Error screen for a message. Press the Select button again when Save is highlighted to confirm all of your changes.Press the Select button when Save is highlighted to confirm your changes. Enter IP address of the DNS Server, pressing the Select button after each. Enter the IP address of the DNS Server, pressing the Select button after each character. If not using DHCP, choose Static DNS to specify the DNS servers that will be used by the wireless adapter, and press the Select button.Choose Auto DNS if you are using DHCP (leave this selected if you are not sure) and skip to step number 5. From the Wireless Settings screen choose Edit Wireless DNS.Choose Wireless Settings from the Connection Settings screen.If you have a static DNS, please use the directions below to connect. Once completed, your CEIVA is ready to receive and display photosâautomatically! A status screen will indicate the connection progress. Push and hold the white Picture button located on the back of your CEIVA until you see the message, âYou can let go now, Iâm dialing in.â Then, relax while your CEIVA connects to the CEIVA Network.Press the Select button twice to save your selection. Selecting each letter is the same process as texting on a mobile phone keypad. If your network requires a key, please enter it at this time via the on-screen keyboard. If your network does not require a key (password), you are finished.Press the Select button again to save your selection. Press the Select button to choose a network. If you do not see your network in the list hit Refresh to scan again. On the Select Wireless Network screen, use the Left and Right Arrow buttons to scroll through available networks.The frame will automatically scan for available networks and display them on the following screen. From the Setup Wireless screen, choose Select Wireless Network.From the How To Connect screen, choose Wireless and press the Select button.From the Connection Settings screen, choose How To Connect.From the Settings screen, choose Connection Settings.From the main menu screen, choose Settings. The Left and Right and Up and Down buttons allow you to make selections and move between different fields.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |